Hayward AquaRite AQR15CUL Manuel Du Propriétaire page 18

ELECTROLYTIC CHLORINE GENERATOR
BASIC POOL MAINTENANCE REQUIREMENTS
TEST
Free Chlorine
pH
Alkalinity
Salt
Stabilizer
Calcium
Electrolytic Cell inspect & clean
17
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
IDEAL RANGE
1.0 - 3.0 ppm
7.2 - 7.6
Too high - add muriatic acid
Too low - add soda ash.
80 - 120 ppm
2700 - 3400 ppm Add salt as required to increase.
20 - 30 ppm
200 - 400 ppm
ADJUSTMENT REQUIRED
Raise desired output % to
increase, lower desired output %
to decrease -OR- increase or
decrease pump filtration time.
Add baking soda to increase.
Add acid as required to decrease.
Add cyanuric acid to increase.
Add calcium to increase.
Drain and add water to decrease.
Refer to section in manual.