Adjusting The Functions; Setting The Time - Piaget 430P Mode D'emploi

430P - 438P
ULTRA-THIN HAND-WOUND MECHANICAL MOVEMENTS

ADJUSTING THE FUNCTIONS

WINDING THE MOVEMENT
Proceed to wind the movement with the crown in position 0. Turn it forward until it locks.

SETTING THE TIME

Pull the crown out to position 1, then turn it forward or backward to position the hands.
0 - 1 F O R WA R D
The mechanism is equipped with a balance-stopping device. Pulling the crown will stop
the movement. Push the crown back to position 0 after the adjustment.
B A C K WA R D
8 9