Adjusting The Functions; Setting The Time; Setting The Date - Piaget 1203P Mode D'emploi

1203P
ULTRA-THIN SELF-WINDING MECHANICAL MOVEMENT, DATE

ADJUSTING THE FUNCTIONS

WINDING THE MOVEMENT
D AT E
Self-winding watches are wound by the movement of the wrist when the watch is worn.
If the watch has not been worn for around 44 hours, wind it by hand with the crown in
position 0, that is, turn the crown in the forward direction (around 10 turns of the crown
are sufficient to restart the mechanism).
0 - 1 - 2 F O R WA R D

SETTING THE TIME

28
Pull the crown out to position 2, then turn it forward or backward to position the hands.
Push the crown back to position 0 after the adjustment.
B A C K WA R D

SETTING THE DATE

Pull the crown out to position 1, then turn it backward to select the desired date. Since
the date change occurs at midnight, make sure you distinguish midnight from noon when
proceeding to the adjustment. In order to avoid damaging the mechanism, we advise you
not to adjust the date between 9 p.m. and 3 a.m. Push the crown back to position 0 after
the adjustment.
8 9