V-ZUG FoodCenter FCP Notice D'installation page 4

Installation instructions
Refrigerator FoodCenter FCP
Validity
These installation instructions apply to the model: 934
This appliance is considered to be suitable for use in countries having a warm damp equable climate (WDaE). It may also be
used in other countries. If used in warm damp equable climated countries, the appliance is to be supplied through a residual
current device (RCD) having a rated residual operating current not exceeding 30 mA.
Electrical connections
Refer to the operating instructions for specifications for the required mains voltage, current type and fuses.
➤
Plumbing in
3 m reinforced hose for water inlet on the back of the appliance (connection ¾" thread).
➤
Water inlet pressure: min. 2 bar ... 8 bar.
➤
Install
* The installation height must be observed to ensure the ventilation of the appliance.
Customer connections (electricity, water inlet) must not be behind the appliance. It must be possible to pull out the appliance
from the niche at all times without dismantling furniture parts.
Installation
Installation in accordance with the supplied installation instructions.
➤
Installation flush with housing
920
8
387 515
4
8
387 515
343
19
160˚ 90˚
90˚
65
Installation flush with front
1110-1300
min. 80–140
343
J934.110-5
24.8.12 WIMA
464
19
160˚
min. 120–250
464