Weston 86-0701-W Mode D'emploi page 8

7. Rest the Canister's Bottom
Brackets onto the Canister
Mounts inside the Housing of the
Stuffer. Pivot the bottom of the
Canister into the Stuffer Housing.
FIGURE 5
Pivot the Canister fully into the
Stuffer Housing, snapping the
Top Brackets into the Canister
Mounts (FIGURE 5).
8. Insert the Stuffing Funnel of
Top Brackets
choice through the Front Ring
Nut. Screw the Front Ring Nut and
Stuffing Funnel onto the mouth of
the Canister until snug. DO NOT
OVERTIGHTEN the Front Ring
Nut, as it may damage the Funnel
(FIGURE 6).
9. Thoroughly coat the inside of
the Canister with a food-grade
Bottom Brackets
lubricant prior to use (FIGURE 7). Outside view of
Canister Mounts
FIGURE 6
FIGURE 7
Mouth of the
Canister
Front
Ring Nut
Funnel
8