Transmission Fluid Change - adiva AD3 200 Mode D'emploi

TRANMISSION FLUID CHANGE
• Park your Vehicle on the centre stand on level ground in a well ventilated area
•
If your engine is Hot, wait for it to return to normal temperature before operation
•
We recommend you wear protective gloves when handling liquids
• Place a suitable container (± 1 litre) under the drain plug (E), Remove the refill
plug (F)
•
Open the drain plug (E) (counter-clockwise) with a suitable wrench
•
Slowly turn the drain plug till the fluid starts to trickle out, when the flow is
stablised, you may remove the whole drain plug and allow the oil to drain
completely
• Inspect the drain plug and washer, clean with a rag, replace and tighten to
specified torque (0.8 ~ 1.2 kgf-m or 69 ~ 104 lbf-in)
E
•
Add Fluid (SAE90)*
and replace the refill plug and tighten to specified torque (0.8 ~ 1.2 kgf-m or 69 ~
104 lbf-in)
TRANSMISSION FLUID TYPE:
TRANSMISSION FLUID CAPACITY: 0.23L
TRANSMISSION FLUID CHANGE CAPACITY: 0.21L
F
Caution: Use only a specified viscosity and high quality Transmission
Fluid. Use of unspecified fluids can seriously damage your
engine's transmission and components!
change the fluid, do not attempt this operation. Bring to your
nearest Authorised ADIVA dealer or Workshop.
17
through the refill according to the amounts listed
see below
SAE 90
If you are unsure how to