Télécharger Imprimer la page

Preliminary Checks; Brakes; Inspection And Maintenance Before Riding - adiva AD3 200 Mode D'emploi

Publicité

Les langues disponibles

Les langues disponibles

INSPECTION AND MAINTENANCE BEFORE RIDING

RUNNING-IN
During the first 1,000 km avoid riding more than 80 percent of the maximum allowable speed. Avoid opening the throttle wide and
covering long distances at a constant speed. After the first 1,000 km gradually increase the speed to the maximum performance taking
care not to go above the speed limit set by your local laws.

PRELIMINARY CHECKS

Time taken in checks will increase your safety and that of others. Avoid riding unless you are certain that your Vehicle is in perfect
working order.
Throttle: Ensure that throttle operation is smooth and even in all handlebar positions. If necessary lubricate and adjust the throttle control.
Fuel and lubricants: Check the fuel, engine oil, transmission oil and brake fluid levels. Top up if necessary. Check for leakages by inspecting the
ground under the vehicle. If any leakage is found, take the vehicle to an Authorized ADIVA Dealer or Workshop.
Side and centre stands: Check that the springs keep the stands in 'home' (horizontal) position.
Brakes: Check the wear of the linings, the operation of the levers and the level of the fluid in the reservoirs.(see page 12)
Lights: Replace any faulty bulbs. Check the operation and orientation of the headlight, rear lights and turn indicators.
Windscreen wiper: Check that the wiper blade is in good condition in order to ensure good visibility in case of need.
Windscreen: Check that the windscreen is clean in order to ensure good visibility.
Caution:
Use only a soft cotton rag and a mild detergent for cleaning the windscreen and any transparent surfaces.
Do not use products that contain alcohol or solvents.
Wheels and tyres: Check the tyre pressures and the wear of the treads. (see page 20)
Steering: Ensure that the steering rotates smoothly throughout its travel (Left to Right).
Fastenings: Check the fastening of all main components and in particular of the wheel and suspension nuts, roof latches.
14

Publicité

loading

Ce manuel est également adapté pour:

Ad3 300