Basic Operation; Horizontal Setup - Hexagon GeoMax ZEL400H+ Manuel De L'utilisateur

2 Basic Operation

2.1 Horizontal Setup

Horizontal setup,
step by step
An overview of laser and keypad functions can be found on page 6.
The laser performs a self-test when switched on. The beam blinks while the
laser is self-levelling. After the laser is leveled, the head will start to rotate.
1. The ZEL400H+ can be used directly on the ground, on the wall mount or
on a tripod with a 5/8" screw.
2. Press the On/Off key (10) to switch the laser on. It will automatically self-
level.
3. To select the Tilt mode, press key (8). Will work only when selected. This
feature stops the laser automatically if the laser is jarred or moved,
preventing inaccurate readings. Push the Tilt key (8) after turning the
instrument on. The Tilt feature is available 30 seconds after the instrument
has self-levelled.
4. To turn the laser off, press On / Off key.
Basic Operation ZEL400H+ | 7