Tilt Key; Rotation Speed - Hexagon GeoMax ZEL400H+ Manuel De L'utilisateur

2.3 Tilt Key

Tilt Mode

2.4 Rotation Speed

Basic Operation
Tilt: Tilt Mode. This will work only when selected.
This feature stops the laser automatically if the laser is disturbed or moved,
preventing inaccurate readings.
Push the Tilt key (8) after switching the instrument on. The Tilt feature is avail-
able 30 seconds after the instrument has self-levelled.
The red light above Tilt key will blink when operating in this mode. If the laser
is disturbed, the head will stop rotating and the red light will be on continu-
ously. Turn the laser off, wait 5 seconds and switch it on again (check that the
beam is at its original reference).
The Tilt Mode function does not operate in vertical in mode.
Your laser is equipped with a visible laser diode.
It may be necessary to adjust the rotation speed according to the ambient light
conditions using Rotation Speed key (11A). The laser beam is more visible in
slow motion. It is possible to stop the rotation and point the beam manually to
view the beam over long distances.
ZEL400H+ | 10