Changing The Bits / Screwdriver Bit Inserts; Preparing The Tool For Use; Switching On / Off The Cordless Screwdriver; Changing The Direction Of Rotation - Parkside PAS 3.6 B1 Instructions D'utilisation Et Consignes De Sécurité

Before first use / Preparing the tool for use / Maintenance and cleaning
time without risk of shortening battery life. Interrupt-
ing the charging process does not damage the
battery.
Starting the charging process:
C onnect the Battery charger
50 Hz mains socket.
C onnect the Battery charger
socket on the device
The rechargeable battery is charged when the
battery indicator
3
Ending the charging process:
D isconnect the Battery charger
mains socket.
D isconnect the Battery charger
charging socket on the device
Changing the bits /
Q
screwdriver bit inserts
Insertion:
I nsert the bit directly into the tool holder
removal:
P ull out the bit out of the tool holder

Preparing the tool for use

Q
Switching on / off the
Q
cordless screwdriver
Switching on:
T o start the appliance squeeze on the oN /
oFF switch and then keep it pressed down.
6
Switching off:
T o stop the appliance, release the oN / oFF
switch .
6
Changing the
Q
direction of rotation
Clockwise:
S lide the direction of rotation switch
34 GB
to a 230 V ~
9
to the charging
9
.
5
changes from red to green.
from the
9
from the
9
.
5
.
8
.
8
to the left.
1
P ress the oN / oFF switch
indicator (clockwise)
now screw in the screws.
Anticlockwise:
S lide the direction of rotation switch
right.
P ress the oN / oFF switch
dicator (anticlockwise)
now screw out the screws.
Lock:
S lide the direction of rotation switch
the middle position. The oN / oFF switch
is now locked.
note: The LED lights
7
the oN / oFF switch
6
oN / oFF switch .
6

tips and tricks

Q
S crew bits are designated with their dimensions
and their shape. If you are unsure, always try
the particular screw bit out to see whether it sits
in the screw head without any free play.

Maintenance and cleaning

Q
SHoCK! Pull the Battery charger
mains socket before carrying out any cleaning
of the device.
The cordless screwdriver is maintenance-free.
A lways keep the device clean, dry and free of
oil or grease.
D o not allow any liquids to enter the device.
U se a cloth to clean the housing. Never use
petrol, solvents or cleaning agents that might
attack plastic.
. The direction
6
illuminates. You can
4
to the
1
. The direction in-
6
illuminates. You can
2
into
1
can still be activated with
locked. Simply press the
DAnGEr oF ELECtrIC
out of the
9
6