Table des Matières
Publicité
Retrait et installation du cadre de verre
Attention:
L'appareil doit être complètement froid avant de retirer le verre.
Attention:
Ne frappez pas et ne claquez pas le verre.
Remarque:
Retirez la barrière avant de retirer le verre (voir page précédente). Remplacer la barrière
après avoir remplacé le verre.
Based upon the face being used, either:
a
(a) swing the access door down and remove the top grill,
(b) remove the face (unscrew or lift off - see the instructions included with the face for details).
Open the six latches holding the glass frame in place (start with the bottom three) - follow the
directions shown to the right.
Lift the glass frame up and
b
pull it forward to remove.
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions above in reverse).
c) Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is all the way in place - it should be flush with
the front of the fireplace when installed.
© Travis Industries
Maintenance
Latch
NOTE:
You may need to lift
Catch
the glass frame
(on glass frame)
while re-attaching.
1/17/2019 – 1409-FR
31
Top of
Firebox
Glass
564 HO GSR2
Publicité
Table des Matières
