Remote Control - Arcam HDA CDS50 Manuel

Remote Control

CD
DISP INFO
MODE
OK
AMP
BAL BAL
CD BD
PHONO
The remote control is pre-programmed for use with
the CDS50 player and also with an Arcam integrated
amplifier. The information in this section applies to the
CD section of the remote control only.
Make sure the two AAA batteries (supplied) are installed
before attempting to use the remote control.
1. With the remote face down, press down on the non-
slip indentations of the battery compartment cover
and slide the cover off
NOTE: The supplied remote control is designed to support both the CDS50 disc player as well as an Arcam
integrated amplifier. The section below applies to the CD section of the remote control only. Refer to the
amplifier user manual for description on the AMP section of the remote control unit.
Toggle the CDS50 power between
standby and powered on
Open/close the disc tray
Search for and play the track
corresponding to the key pressed
when playing a CD
Cycle through the front panel
display brightness options
Cycle through the information
INFO
displayed on the lower left portion
of the front panel display
Scan backwards (fast rewind) at 4x
normal playback speed
Scan forwards (fast forward) at 4x
normal playback speed
2. Insert the two AAA batteries (supplied). Take care to
insert the batteries in the right direction by following
the '+' and '-' marks in the battery compartment
3. Slide the battery compartment cover back and lock
it in place with a click
The remote control requires a clear line of sight to the
front panel of the CDS50 to ensure reliable operation.
Skip back to the beginning of the
current/previous track
Skip forward to the beginning of
the next track
Stop playback
Play content
Pause playback
Cycle through different playback
MODE
modes (random, repeat one,
repeat all)
EN-11
Input select buttons. Select the
optical or coaxial digital audio
OK
input, USB media input or the
internal disc player input
Navigate the files and menus on
the display. Press OK to select
OK
the highlighted file or enter the
highlighted menu option
EN