Specifications - Arcam HDA CDS50 Manuel

Specifications

Analogue Audio Output
Digital to Analogue Conversion
Signal/Noise Ratio (Awtd)
Harmonic Distortion (1kHz)
Frequency response
Output Level (0dB)
Output Impedance
Minimum Recommended Load
RMS Jitter
Digital Inputs
Optical
Supported sample rates
Coaxial
Bit depth
Digital Interfaces
USB
Ethernet
Wireless
General
Mains voltage
Maximum power consumption
Dimensions (W x H x D)
(including feet and control knob)
Weight (net)
Weight (gross)
Supplied accessories
ESS9038 32-bit/192kHz Delta-Sigma DAC
118dB unbalanced, 122db balanced
<0.0008%
10Hz – 20kHz ± 0.5dB
2.2Vrms unbalanced, 4.5Vrms balanced
47Ω unbalanced, 600Ω balanced
5kΩ
< 20 psec
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
16-bit – 32-bit
USB 2.0 High Speed (480Mbps)
10/100Mbps
802.11b/g/n
110–240V, 50–60Hz
20W
433x87x283mm
5.3kg
7.3kg
Mains leads
Remote control
2 x AAA batteries
Wi-Fi Antenna
EN-13
All specification values are typical unless otherwise
stated. Arcam has a policy of continuous improvement
for its products. This means that designs and
specifications are subject to change without notice.
E&OE.
EN