Rear Panel Connections; Analogue Audio Outputs; Network; Usb - Arcam HDA CDS50 Manuel

Rear Panel Connections

POWER INLET
Connect the correct
mains cable here Connect the supplied Wi-Fi antenna
POWER INLET
100V-240V~
50/60Hz, 17W

NETWORK

Connect to your home network router
See "Network" on page EN-9
Please read the sections "Placing The Unit", "Power" and
"Interconnect Cables" on page EN-6 before connecting your
CDS50 player!
Connect to a third party home automation
Wi-Fi ANTENNA
ANT
NET
DIGITAL AUDIO OUTPUTS
Connect to the digital inputs of your AV
receiver
See "Digital Audio Outputs" on page EN-9
DIGITAL AUDIO INPUTS
Connect a digital audio source
See "Digital Audio Inputs" on page EN-9
RS232
system
See "RS232" on page EN-9
DIGITAL OUT

USB

RS232
5V 0.5A
COAX
OPT
Connect to an external remote control device
See "Remote IR Control" on page EN-9
USB
Insert USB flash memory devices here.
See "USB" on page EN-9
EN-7

ANALOGUE AUDIO OUTPUTS

Connect to the audio input of your amplifier.
See "Analogue Audio Outputs" on page EN-9
ANALOGUE OUT
DIGITAL IN
IR IN TRIG IN
OPT COAX R L
REMOTE IR IN
12V TRIGGER IN
Connect to the TRIGGER OUT of a compatible
device, to allow the CDS50 be switched in and
out of standby
See "Trigger In" on page EN-9
EN
L
R