Kalorik MAXX Mode D'emploi page 10

selector dial once more. The 2
blink. If you wish to change the temperature setting, simply turn clockwise
to increase temperature and counterclockwise to decrease temperature,
both possible by increments of 5°F. If you wish to select a different preset,
press a 3 time to go back to preset selection.
rd
Got your time and temp set? Press Start/Stop to begin the cooking process.
The selected program will blink to indicate the unit is preheating under the
chosen programming. The preset light will blink until the chosen
temperature has been reached, and then remain steady to indicate the
unit is ready. The fan icon will turn on as well if the program you have
selected uses a fan for its cooking process.
Need to adjust? Change time or temperature settings with ease at any
point during the cooking process. All you need to do is press the selector
dial once (1) for time adjustments and twice (2) for temperature
adjustments. Press again a 3
adjust to new time and/or temperature after 3 seconds.
All done? MAXX is equipped with both an automatic and manual stopping
function.
In automatic stop, once the cooking time has elapsed (0:00), MAXX will
beep three (3) times and enter "Off" mode (display will show "OFF OFF").
The inner fan will continue to work for 3 minutes to help the unit cool down
if the selected mode used the fan (AIR FRY), and all lights other than
"START/STOP" will turn off. The side cooling fans will turn in all modes to assist
with the cooling process.
To turn off MAXX manually, press the Start / Stop button once and the
machine will enter "Off" mode as described above.
If the unit is in the process of entering "Off" mode in either way, you can re-
enter Standby mode during the 3 minutes of cooling process by pressing
Start / Stop. After three minutes, the unit will emit a single beep to tell you
the cooling process is finished.
Notes:
MAXX will turn off automatically if the French Doors are open for longer
o
than 10 minutes during a cooking process.
www.KALORIK.com
press will cause the temperature setting to
nd
time to confirm, or unit will automatically
rd
10
AFO 46045 – 200723C