Software Update; Auto Update; Usb Update - Samsung HW-S60T Manuel

11 SOFTWARE
UPDATE

Auto Update

When the Soundbar is connected to the Internet,
software updates automatically occur even when
the Soundbar is turned off.
• To use the Auto Update function, the
Soundbar must be connected to the Internet.
The Wi-Fi connection to the Soundbar will be
terminated if the Soundbar's power cord is
disconnected or the power is cut off. If the
power is cut off, when the power comes back
on or you reconnect the power cord, turn on
the Soundbar, and then reconnect it to the
Internet.

USB Update

Bottom of the Soundbar
SERVICE
Micro USB to
USB adapter Cable
(not supplied)
Samsung may offer updates for the Soundbar's
system firmware in the future.
When an update is available, you can update the
Soundbar by connecting the USB drive that
contains the update firmware to the SERVICE
port of the Soundbar.
DC 19V
DIGITAL AUDIO IN HDMI
(OPTICAL) (ARC)
ID SET NETWORK
SERVICE DC 19V
1. Go to the Samsung website
(www.samsung.com) → search for the model
name from the customer support menu
option.
• For more information about update, refer
to Upgrade Guide.
2. Download the upgrade file (USB type).
3. Unzip the file to create a folder with the file
name.
4. Store the created folder in a USB and then
connect it to the Soundbar.
5. Turn on the Soundbar. Then the product is
updated within 3 minutes.
LED
Indicator
• During update, do not turn it off or
remove the USB.
• If update does not proceed, reconnect the
Soundbar power cord.
• When the latest version is installed, no
update is performed.
• Depending on the USB type, update may
not be supported.
ENG - 38
White moves from left to right
and right to left
Software update start :
"Start the software update."
Software update end :
"The software update is complete."