Speedlink SL-8236 Mode D'emploi page 9

1. Audio input cable
2. Left speaker cable
3. Right speaker cable
4. IR remote control cable
5. Power supply
Operation
To turn on speaker system, please press main switch on the front of the
subwoofer. LED will light up.
NOTE: Pressing „Power" button on the remote control will set the system into
standby mode, it will not be switched off completely!
Remote Control
Volume ()
Press  button to raise volume and  button to lower it.
Bass ()
Adjust bass sound individually by pressing Up/Down buttons.
1 2 3 4
5
9
GB