Try To Connect To A Website; Configure The Router; For More Information About Your Router; Obtaining Documentation - Cisco Systems SB 101 Guide De Démarrage Rapide

Chapter 1 Cisco SB 101 Router Cabling and Setup

Try to Connect to a Website

Log on to a PC that is connected to the router, open a web browser, and connect
to a website. If you successfully access a website, you do not need to change the
configuration and you have completed setup. If you cannot access a website,
follow the steps in the

Configure the Router

Configure the router by following the instructions in the Cisco Router and
Security Device Manager (SDM) Quick Start Guide. This document shows you
how to connect your PC to your router and how to use SDM, a configuration tool
that you run from your web browser.
Additional information about SDM is available at the following URL:
www.cisco.com/go/sdm
Click the Technical Documentation link to view release notes and other SDM
documentation.

For More Information About Your Router

Refer to the Regulatory Compliance and Safety Information for Cisco
SB 100 Series Router document for international regulatory and safety
compliance information for all Cisco SB 100 series routers.

Obtaining Documentation

Cisco documentation and additional literature are available on Cisco.com. Cisco
also provides several ways to obtain technical assistance and other technical
resources. These sections explain how to obtain technical information from Cisco
Systems.
78-16771-01
"Configure the Router" section on page
Cisco SB 101 Router Cabling and Setup

Try to Connect to a Website

1-7.
1-7