Using The Timer; Automatic Cut-Out; Selecting A Cooking Zone - AEG 68002K-MN Notice D'utilisation

12 Operating the appliance

Using the timer

All cooking zones can use each use one of the two timer functions at the same
time.
Function

Automatic cut-out

Countdown timer
3
If a cooking zone is switched off, the timer function set is also switched off.
3
If a heat setting is set on this cooking zone in addition to a countdown timer,
the cooking zone is switched off after the time set has elapsed.

Selecting a cooking zone

Step
1.
2.
3.
4.
3
The heat setting indicator of the selected cooking zone goes out, as long as the
timer time can be set.
3
If the pilot light is flashing more slowly, the heat setting indicator appears again
and the heat setting can be re-set or modified.
3
If other timer functions are set, after a few seconds the shortest remaining time
of all the timer functions is displayed and the corresponding pilot light flashes.
cooking zones not in use
Control panel
Touch once
Touch once
Touch once
Touch once
Condition
a heat setting is set
Pilot light of the first cook-
ing zone flashes
Pilot light of the second
cooking zone flashes
Pilot light of the third
cooking zone flashes
Pilot light of the fourth
cooking zone flashes
Outcome after the
time has elapsed
acoustic signal
flashes
00
Cooking zone switches
off
acoustic signal
flashes
00
Display