Lubrication; Replacing Light Bulbs - LGB 22412 Mode D'emploi

Masquer les pouces Voir aussi pour 22412:

Table des Matières

Les langues disponibles

MAINTENANCE

Lubrication

The axle bearings and the bearings for the valve gear should be oiled now and then

with a drop of Märklin oil (7149).

Lamps (front): Pull the lamp holder down and out of the lantern. Replace the light bulb.

Put the lantern back together.

Lamps (rear): Carefully lift the lens out of the lantern housing. Then use a pair of

tweezers to pull the light bulb out of the bulb holder. Now insert a new light bulb.

Finally, put the lantern back together.

Interior Lighting: Use a pair of tweezers to change the light bulb. The light bulb is

mounted on the back wall behind the engineer.

Replacing Traction Tires

• Use a small flat screwdriver to change the track tire: Lift the old traction tire out of

the groove in the driving wheel.

• Carefully push the new traction tire into the groove in the wheel.

• Check to make sure that the traction tire is correctly seated.

Table des Matières