Cleaning The Cooling System; Fuel System Maintenance; Replacing The In-Line Fuel Filter - Toro TimeCutter ZS 4200T Manuel De L'utilisateur

Cleaning the Cooling
System
1. Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P
position.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the air filter from the engine.
4. Remove the engine shroud.
5. To prevent debris entering the air intake, install
the air filter to the filter base.
6. Clean debris and grass from the parts.
7. Remove the air filter and install the engine
shroud.
8. Install the air filter.
Fuel System
Maintenance
DANGER
ARK
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you and others
and can damage property.
Refer to
list of fuel related precautions.
WARNING
Contact with hot surfaces may cause personal
injury.
Keep your hands, feet, face, clothing and
other body parts away the engine, muffler and
other hot surfaces.
Replacing the In-Line Fuel
Filter
Service Interval: Every 100 hours or yearly,
Every 200 hours/Every 2 years (whichever
comes first)—Replace the in-line fuel filter.
Never install a dirty filter after removing it from the
fuel line.
1. Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P
position.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Replace the filter
Note:
filter follow the fuel flow direction.
36
Fuel Safety (page 12)
whichever comes first—Check the
in-line fuel filter.
(Figure 46).
Note: Ensure that the markings on the
for a complete
ARK