Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Maintenance information
• Lubrication of all moving parts is essential to the longevity and optimal performance of your Ma-
chine. Note: Do not use oil based lubricants as they will attract dust, dirt and grime, and will even-
tually gum up and erode bushings and sealed bearings.
• There is a bottle of silicone oil for lubricating the slip orbit in tool bag.
• All bushings should be checked regularly for signs of wear.
• Check and adjust cable tension periodically as it will maintain proper anatomical function.
• Periodically check all moving parts, upholstery and grips for signs of wear or damage. If there is a
problem or replacement part which is necessary, STOP USING THE EQUIPMENT and immediately
contact your local retailer. Replace parts using only genuine parts.
• When checking the bolts and nuts, be sure they are all fully fastened. If there is a bolt or nut that
continuously loosens obtain a replacement through your local retailer.
• Check welds to be free of cracks.
Cleaning
• As needed, upholstery may be cleaned with a mild solution of soap and water. Regular use of a
vinyl treatment will add to the life and appearance of your upholstery.
• All chrome plated surfaces should be cleaned regularly to prolong the life and luster of the finish.
Wipe machine down with a damp cloth and dry thoroughly each day. At least once a week your
chrome equipment should be polished with a commercial grade or automotive type chrome polish.
Maintenance
63
Publicité
Chapitres
Table des Matières
