Ribimex Ribiland PRW254A Manuel D'instructions Et D'utilisation page 25

4.3- Assembly and adjustments
PRW254A /
Product assembly
515676
1- Assemble motor housing and middle tube: insert two parts together, fix two parts by
the screw.
2- Assemble main handle and middle tube: insert two parts together, fix two parts with
the screw
3- Assemble auxiliary handle
PRW503A / To assemble the auxiliary handle
515686
Assemble the auxiliary handle to the mount provided, then secure the auxiliary handle with
the help of the screw and the adjustment lock provided.
To adjust the angle of auxiliary handle: undo the
adjustment lock knob (a) for the auxiliary handle until
it can be moved forward or backwards without any
great resistance.
Set the handle to the required working position and
then tighten the lock knob (a) again.
To adjust the handle height
1. Rest trimmer base on the ground.
2. Loosen the locking ring (7) on the tube.
3. Slide the tube back and forth to adjust the height
to suit your own stature.
4. Tighten the locking ring.
Note: ensure that metal tube is securely locked.
To adjust the angle of motor head motor
Press the button (b) for the angle adjustment and tilt
head to choose a fit working position. There are five
different locking angles.
Warning: Take extra care when using this lawn trimmer as an edger. Keep away from the line of
rotation to avoid any flying particles that may result from edging.
This lawn trimmer is designed to maintain existing edges. It should not be used to create edges. Edges can
be created using an edging spade
Page 25 / 45