Ribimex Ribiland PRW254A Manuel D'instructions Et D'utilisation page 22

- Do not assume of your knowledge of the tool. Remember that a split second of negligence is sufficient
to cause serious damage. Be aware of your surroundings and stay alert for potential hazards that you may
not hear while operating the tool.
- Any distraction can make you lose control of the tool. If someone calls you, stop the tool before turning
towards the caller.
3.2.4- Before maintenance and storage
- Keep all nuts, bolts and screws tight to be sure the tool is in safe working condition.
- Check the cutting devices frequently for signs of wear and/or deterioration.
- Replace any worn or damaged part.
- Make sure to use only genuine/original replacement parts and accessories.
- For reasons of safety, any worn or damaged component should be replaced or repaired immediately by a
qualified technician.
- When not in use, store the tool only in a dry place that is inaccessible to children.
3.3- Additional safety rules for Grass Trimmers
a) Wear eye protection and gloves.
b) Never allow children or people who are not familiar with these instructions to use the machine.
c) Stop using the machine when people, in particular children or pets, are nearby. A minimum 15m
distance is recommended.
d) Only use the machine in daylight or bright artificial lighting.
e) Before starting to operate the machine and after any impact check for signs of wear and tear or
damages and have the necessary repairs carried out. Never use the machine when the protection is
damaged or missing.
f) Always keep hands and feet away from the cutting unit, especially when you switch on the engine.
g) Treat the cutter that is used to cut the length of trimming line with care – you could injure yourself with
it. After you've pulled out a new thread always keep the machine in its normal working position before
switching it on.
h) Never use anything other than the correct nylon cutting line.
i) Never use spare parts and accessories not provided or recommended by the manufacturer.
j) Make sure that any ventilation holes are free from dirt. If required, use a vacuum to clear obstructions.
k) -
l) Switch off the tool when transporting to and from the area to be worked on or between two working
areas.
m) Protect yourself against injury hazard resulting from accidental contact with the Nylon line trimming
blade.
n) After refilling the spool, pull the line with your hands, and then always turn the tool to its normal
operation position before switching on.
o) Do not press with your hand on the spool to feed the line, as the spool may be hot.
p) Remove any grass or debris from the spool before refilling the line or changing the spool.
3.4- Special warnings when using the product
1. Become familiar with the controls and the proper use of the tool.
Learn how to stop the tool quickly in an emergency.
2. The use of this product is forbidden to children. Individuals below the age of 16 and individuals who
are not perfectly familiar with the instructions, are not allowed to operate the machine
3. Only well-instructed adults should operate the product. This product is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the product by a
person responsible for their safety.
4. Within the working area, the person using the machine is responsible for any damage or injury
Page 22 / 45