Front Hood Installation - Continental Fireplaces CB46NTR Instructions D'installation Et D'opération

Leave a hand on the glass door during entire door
removal. The glass door is secured to the fi rebox with
two spring latches along the top and two along the
bottom. Pull the handles of the latches forward, then
lift the latches out from the door frame to release the
top of the door. Repeat the same step for the two
bottom latches. Next, pivot the door forward until the
top edge clears the front of the appliance. Carefully
grip the sides of the door lifting it off the appliance.
NOTE: These spring latches make up the spring
relief system for the appliance. Ensure they open
freely and close sealed.
Reverse these steps to reinstall the safety screen and
door. Ensure safety screen is installed correctly.
6.2

FRONT HOOD INSTALLATION

NOTE: This hood MUST be installed.
A. Safety door and screen must be removed.
B. Remove the 5 securing screws from the top of the fi rebox, as shown.
C. Install the front hood, ensure it is angled downward when installed.
D. Reinstall the 5 securing screws.
HOOD
X5
SIDE VIEW
Spring
Spring Latches
Latches
47
EN
W415-1616 / A / 04.15.16