Clearances Around Appliance - Continental Fireplaces CL38 Manuel Du Propriétaire

WARNING
!
• Your appliance, gas/electrical connections, venting and various key components are hidden behind the wall. It
is critical that no screws penetrate the areas illustrated below. Failure to follow instructions may cause improper
operation, damage, personal injury or fi re. Always use a stud fi nder and only screw into studs.
Ceiling
Stud
important:
If in doubt, refer to your installation manual and/or contact your authorized dealer.

3.0 clearances around appliance

Safety Barrier
(L illustrated)
Dynamic Heat Control™
The temperatures above the
appliance for CL models will
be hot, making it unsuitable
for mounting a TV or other
objects sensitive to heat
above the appliance without
risk of damage.
Installing a mantel
between this appliance and
electronics or other materials
that may be sensitive to
heat will reduce the effect of
direct heat on them.
The size and material of
the mantel will affect the
allowable clearance above
your appliance and incorrect
placement could become
a fi re hazard. Consult your
installation manual and/or
authorized dealer for more
information.
Your appliance, gas/electrical
connections and vent are
hidden directly behind the
fi nished wall. Great care
should be taken to avoid
screwing or nailing into these
components. Always use a
stud fi nder to determine stud
location and only screw into
studs.
Do not screw into the
area around the appliance
opening.
No screws
in this area.
W415-2039 / A / 10.18.19
EN
13