De Dietrich AD340 Notice D'installation Et D'utilisation page 44

4- Configuration
CF29 - Anticipation slope setting
The slope setting depends on the heating system.
It is set between 1°C/h to 6°C/h /(in steps of 0.1°C/h).
Default value: 3°C/h.
If the temperature is reached too early, reduce the value.
If the temperature is reached too late, increase the value.
Press + or - to set.
Press OK to confirm. Switch to the CF30 menu.
CF30 - Display of room temperature in shutdown mode
0
1
Press + or - to activate or deactivate.
Press OK to validate and exit the mode.
CF31 - Setting range of the Economy set-point
0
1
Press + or - to activate or deactivate.
Press OK to validate and exit the mode.
44
Setting from 5°C to Comfort Set-point
Setting from 5°C to 19°C
Deactivated
Activated