GYS FLASH 18.12 PL Mode D'emploi page 8

Translation of the original instructions
SAFETY INSTRUCTIONS
This manual contains safety and operating instructions, to be
followed for your safety. Please read it carefully before using
the device for the first time and keep it for future reference.
This machine should only be used for charging or power supply
operations comprised within the limits indicated on the machine
and in the instructions manual. The operator must observe
the safety precautions. In case of improper or unsafe use, the
manufacturer cannot be held liable.
The device is destined to be used indoors. Must not be exposed
to the rain.
This unit can be used by children aged 8 or over and by people
with reduced physical, sensory or mental capabilities or lack of
experience or knowledge, if they are properly monitored or if
instructions for using the equipment have safely been read and
risks made aware of. Children must not play with the product.
Cleaning and maintenance should not be performed by an
unsupervised child.
Do not use to charge domestic batteries or non rechargeable
batteries.
Do not operate the device with a damaged power supply cord
or a damaged mains plug.
Do not use the device if the charging cable appears to be
damaged or assembled incorrectly in order to avoid any risk of
short circuiting the battery.
Never use on a frozen or damaged battery.
Do not cover the device.
Do not place the device near a fire or subject it to heat or to
longterm temperatures exceeding 50°C
Do not obstruct the machine's air intake, which facilitates air
circulation.
The operating mode of the automatic charger and the restrictions
applicable to its use are explained later in this manual.
Fire and explosion risks!
A charging battery can emit explosive gases.
• During the charge, the battery must be placed in a well
• Avoid flames and sparks. Do not smoke near the device.
• Protect the battery's electrical contact surfaces against short-
Acid projection hazard !
• Wear safety goggles and protective gloves
8 8
GYSFLASH 18.12 PL
ventilated area.
circuits.
EN