General Precautions - TOPP T80 Instructions Pour L'installation Et L'utilisation

6- INSTALLAZIONE T80 EN
INSTALLATION -6
6.1-

GENERAL PRECAUTIONS

THE ACTUATOR MAY ONLY BE INSTALLED BY COMPETENT AND QUALIFIED
TECHNICAL PERSONNEL WHO SATISFY THE PROFESSIONAL AND TECHNICAL
REQUIREMENTS ESTABLISHED BY THE LAWS IN FORCE IN THE COUNTRY OF
INSTALLATION.
THE ACTUATOR MUST PERFORM WELL ENOUGH TO ENSURE THE WINDOW
MOVES CORRECTLY; THRUST OR TRACTION MUST BE VERIFIED ACCORDING TO
THE TYPE AND WEIGHT OF THE WINDOW FRAME (PARA 3.6).
DO NOT EXCEED THE TECHNICAL LIMITS INDICATED IN TAB. 1 (PARA 3.3).
ONLY INSTALL THE ACTUATOR WITH THE WINDOW OR SKYLIGHT CLOSED.
TO ALLOW THE ACTUATOR TO WORK CORRECTLY, THE HEIGHT OF THE WINDOW
FRAME MUST VARY ACCORDING TO THE STROKE (570.6 mm, 620.6 mm, 740.6 mm,
940.6 mm, 1140.6 mm, 1390.6 mm; DISTANCES FROM THE ACTUATOR TO THE HINGE
OF THE WINDOW FRAME); IF THIS IS NOT THE CASE, ASK YOUR LOCAL DEALER
OR THE MANUFACTURER FOR THE ACCESSORIES REQUIRED FOR CORRECT
INSTALLATION.
FOR APPLICATIONS ON SKYLIGHTS, MAKE SURE THE ACTUATOR CAN ROTATE
FREELY AND OPEN THE WINDOW WITHOUT HITTING THE WALL OR OTHER
OBSTACLES.
PROTECT THE RACK OF THE ACTUATORS TO PREVENT POSSIBLE CONTACT
BETWEEN ANY PERSONS/OBJECTS IN THE VICINITY AND THE RACK OR STEM,
DURING THE MOVEMENT AND IN THE CLOSED POSITION.
MAKE SURE THAT THE WINDOW FRAME ON WHICH THE ACTUATOR IS INSTALLED
IS FITTED WITH SUITABLE MECHANICAL LOCKS, IN COMPLIANCE WITH CURRENT
REGULATIONS, TO PREVENT THE WINDOW FALLING BY ACCIDENT.
CHECK THE ADEQUACY OF THE WINDOW AND THE SUITABILITY OF THE MATERIALS
OF THE WINDOW AND/OR FRAME ON WHICH THE ACTUATOR WILL BE FASTENED. AND
IT MUST ENSURE A GOOD SUPPORT OF THE ACTUATOR-WINDOW ASSEMBLY DURING
THE MOVEMENT.
INSTALLATION AND USE INSTRUCTIONS 35