Filters; Filter Change Indicator; Filter Replacement Cycle - brondell CIRCLE RC100 Manuel Du Propriétaire

FILTERS AND FILTER CHANGE INDICATOR

FILTERS

The filters are critical to the performance of the Circle Reverse Osmosis Water Filtration system, and
it is important to replace all of the filters on a regular basis. If any of the filters are overused beyond
the recommended service life, the performance of the water filtration device can deteriorate. Do not
miss the filter replacement cycle or use non-compatible filters as this can affect system performance
or damage the unit.
Contact Brondell at 888-542-3355, or visit us on the Web at www.brondell.com to order
replacement filters.

FILTER CHANGE INDICATOR

The LED filter change indicator in the faucet works by tracking both time and water flow from the
Circle RO system. When 6 months time or 475 gallons of water has been filtered through the system
(whichever comes first), the LED will flash red when dispensing water instead of flashing blue.
When the faucet LED indicator begins to flash red, it's now time to change the filters and reset the
faucet indicator by replacing the battery.
Note: a new battery is always included with the RF-20 filter replacement set.

FILTER REPLACEMENT CYCLE

Part Number
RF-20
RF-40
* The filter replacement cycle may be reduced for areas with poor water quality or greater use.
* The period for the filter exchange is based on an average production of 2.6 gallons of
drinking water per day.
Filter Name
Sediment Filter
Pre-Carbon Plus Filter
Post Carbon Block Filter
RO Membrane Filter
Usable period
6 months
6 months
6 months
24 months
15