Filters & Filter Change Indicator; Filter Change Indicator; Filter Replacement Cycle - brondell H2O+ CORAL UC300 Manuel De L'utilisateur

FILTERS & FILTER CHANGE INDICATOR
FILTERS
The filters are critical to the performance of the Coral UC Water Filtration system, and it is
important to replace all of the filters on a regular basis. If any of the filters are overused beyond the
recommended service life, the performance of the water filtration device can deteriorate. Do not
miss the filter replacement cycle or use non-compatible filters as this can affect system performance
or damage the unit.
Contact Brondell at 888-542-3355, or visit us at www.brondell.com to order replacement filters.

FILTER CHANGE INDICATOR

The LED filter change indicator in the faucet works by tracking both time and water flow from the
Coral UC system.
UC300 – When 12 months have elapsed or 600 gallons of water has been filtered through the system
(whichever comes first), the LED will flash red when dispensing water instead of flashing blue.
UC100 – When 6 months have elapsed or 300 gallons of water has been filtered through the system
(whichever comes first), the LED will flash red when dispensing water instead of flashing blue.
When the faucet LED indicator begins to flash red, it's now time to change the filters and reset the
faucet indicator by replacing the battery.
A new battery is always included with the UF-35, or UF-15 filter replacement set.

FILTER REPLACEMENT CYCLE

Part Number
UC300
UF-35
UC100
UF-15
* The filter replacement frequency may be increased for areas with poor water quality or
greater use. The period for the filter exchange is based on an average production of 1.64
gallons of drinking water per day.
16
Filter Name
Sediment Filter
Pre-Carbon Plus Filter
Carbon Block Filter
Carbon Block Filter
Usable period*
12 months
12 months
12 months
6 months