Ez Mode - MSI MEG X570 ACE Présentation Rapide

EZ Mode

At EZ mode, it provides the basic system information and allows you to configure the
basic setting. To configure the advanced BIOS settings, please enter the Advanced
Mode by pressing the Setup Mode switch or F7 function key.
A-XMP switch
GAME BOOST
switch
Information
display
M-Flash
Favorites
Hardware
Monitor
y GAME Boost switch (optional) - click on the center button to switch the GAME
BOOST be controlled by software (SW) or hardware (HW) . The inner circle represents
the current stage of hardware GAME BOOST and the outer circle stands for software.
You can read the abilities of GAME Boost by clicking on the question mark in the right-
bottom corner. This function will only be available if the installed processor supports
this function.
Important
Please don' t make any changes in OC menu and don' t load defaults to keep the
optimal performance and system stability after activating the GAME BOOST function.
y A-XMP switch (optional) - click on the inner circle to enable/ disable the A-XMP.
Switch the outer circle to select the memory profile if any. This switch will only be
available if the installed processor and memory modules support A-XMP function.
y Setup Mode switch - press this tab or the F7 key to switch between Advanced mode
and EZ mode.
y Screenshot - click on this tab or the F12 key to take a screenshot and save it to USB
flash drive (FAT/ FAT32 format only).
y Search - click on this tab or the Ctrl+F keys to enter the search page. It allows you
to search by BIOS item name. Move the mouse over a blank space and right click the
mouse to exit the search page.
Important
In search page, only the F6, F10 and F12 function keys are available.
y Language - allows you to select language of BIOS setup.
y System information - shows the CPU/ DDR speed, CPU/ MB temperature, MB/ CPU
type, memory size, CPU/ DDR voltage, BIOS version and build date.
Setup Mode switch
Screenshot
Search
Language
System
information
Boot device
priority bar
Function
buttons
45
BIOS Setup