Solving Problems; Disposal Of Your Old Appliance - Montiss CSC620 Mode D'emploi

STORAGE
Before storing the steam mop, ensure that it has cooled and dried fully. Ensure that the water tank is
empty, remove the micro-fibre pad and wash ready for next use.
Store in a clean dry place.

SOLVING PROBLEMS

Problem
1. The device is not producing steam
2. The device does not turn on

DISPOSAL OF YOUR OLD APPLIANCE

1. When this crossed-out wheeled bin symbol is attached to a product it means the product is
covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste
stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for
the environment and human health.
4. For more detailed information about disposal of your appliance, please contact your city office,
waste disposal service or the shop where you purchased the product.
Possible solution
The water tank may be empty, add water to
refill the water tank
The steam nozzle may be blocked. Clean the
steam mops nozzle
There is no power to the steam mop. Make sure
the steam mop is plugged in to the mains
power supply.
The fuse or breaker might be blown. Check the
fuse by replacement or reset the breaker. If the
device still does not turn on contact customer
service.
The power cord might not be plugged in. Plug
the power cord into a working mains power
supply.
24