Montiss CSC620 Mode D'emploi page 22

ASSEMBLY
4. Slide the handle tube (B) into the handle (A) until it clicks into place
5. Slide the handle tube (C) into the handle (A) until it clicks into place
6. Slide the handle tube (C) with handle installed to the main body (D), until it clicks into place
Please note: The handle can be removed from the steam mop body for easy storage by pressing the
Handle tube button.
Attaching the steam head
1. Slide the bottom end of main body (D) onto the
steam head (E) until Steam head Spindle 12
clicks into place
Please note: The steam head (E) can be
removed from the main body (D) by pressing
salient point on the steam head (E) spindle
Attaching a Micro-fibre pad and carpetslider
1. Place the micro-fibre pad (F) in between the steam
head (E) and the carpet glider (G) and press down
firmly. This will hold the micro-fibre pad in place
due to the design of the steam mop head.
A
B
C
D
D
F
E
E
22