Franke CRYSTAL FMW 45 CR C Manuel D'installation Et Mode D'emploi page 13

Using the microwave function
In manual mode you are cooking by setting
a program, the temperature and duration
according to your preferences.
X X
Select the function with the button
1000 W
„ „
A time is displayed by default (1.30
minutes) and the maximum power
(1000 W) is preprogrammed.
X X
To modify this time, press
with the buttons
X X
Press to confirm.
„ „
Your oven starts.
X X
Select the function with the button
... W
X X
To modify the power level, press
adjust the power with the
X X
You may also set the time by pressing the
key adjust the time with the
keys.
X X
Press to confirm.
„ „
Your oven starts.
Using the combined microwave function
X X
Select the function with the button
„ „
A time is displayed by default (30
minutes) on the right-hand screen.
„ „
The pre-programmed power (300 W)
and temperature (200°C) are displayed
on the left-hand screen.
X X
To modify this time, press
with the buttons
X X
Press to confirm.
„ „
Your oven starts.
X X
To modify the microwave power level or the
temperature, press
the settings with
X X
Press to confirm.
„ „
Your oven starts.
Using the classic cooking functions
1
X X
Press and select a classic cooking
2
3
function.
Your oven will recommend a temperature which
can be modified with
X X
Press to confirm.
„ „
Cooking starts immediately.
„ „
The temperature indicator flashes until
the temperature has been reached.
X X
To set the temperature, press
X X
Adjust the temperature with
X X
Press to confirm.
FMW 45 CR C XS / FMW 45 CR C BK
1
2
3
then adjust
and
1
.
2
3
key,
°C/W
and keys.
and
1
2
3
and adjust
and
and then adjust
°C/W
and
and
°C/W
and
– 13 –
„ „
The oven starts to heat; the cooking
function flashes.
„ „
A series of beeps sounds when
the oven has reached the selected
temperature.
X X
Press
„ „
The cooking time display flashes to
indicate that it can be set.
X X
Press and
time.
X X
Press to confirm.
Your oven has the SMART ASSIST function
which, when programming a cooking time, will
suggest a cooking time which can be modified
depending on the selected cooking mode. See
the table below:
Cooking mode
Pulsed grill
Medium grill
Fan oven
End of cooking
X X
Proceed as for programmed cooking.
X X
After setting the cooking time, press
„ „
The cooking end time indicated with
the symbol
X X
Adjust the cooking end time with
X X
Press to confirm.
„ „
The cooking end time display stops
flashing.
Memo active function
If the same cooking function has been used
during the last three cooking sessions, it will be
memorised and automatically suggested at the
next cooking session.
For each cooking function, if you modify three
times the recommended temperature with the
same information, it will be memorised as the
new recommended temperature.
Note: This function is disabled by default.
To activate it, go to the settings menu (see
Settings paragraph).
to adjust the cooking
Cooking time
recommendation
15 min
7 min
30 min
flashes.
and
EN