Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7. Remove 1/4" clevis pin from other clevis/yoke on compression cylinder assy.
8. Align holes in clevis/yoke to hole in curved link plate. Insert clevis pin through holes and
secure with cotter pin(Do not bend over legs of cotter pin yet).
Clevis pin
Cotter pin
9. Push entire hitch assembly forward until there is no movement.
10. Install cross member and ensure it is centered and straight by shimming (if necessary) and
then torque bolts to 75 lbs.-ft. Note: Multiple Shims can be stacked together if gap width
is large.
Shim location.
A portion of the housing
was removed for clarity.
All Products limited to Vehicle Tow Rating; see Vehicle Owners Manual
March 15, 2012-REV 5
See
www.huskytow.com
for Warranty Information / Tech Support
Page 9 of 16
Shim location.
Publicité
Table des Matières
