Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Spacer plates below
bed corrugation.
BASE RAIL
BED
CORRUGATION
2 spacer plates must
be installed on each
carriage head bolt
and oriented in an
"X" shape.
6. Tighten the 5/8" hex nuts to 150 lbs.-ft.
7. Once the bed rails are square and the center bolt kit is properly installed you can start the
installation of the "HUSKY 10-26K".
All Products limited to Vehicle Tow Rating; see Vehicle Owners Manual
March 15, 2012-REV 5
2 spacer plates must
be installed on each
carriage head bolt
and oriented in an
"X" shape.
Figure 2
See
www.huskytow.com
for Warranty Information / Tech Support
Page 6 of 16
1 Spacer plate above bed corrugation &
1 spacer plate below bed corrugation.
BASE RAIL
BED
CORRUGATION
Publicité
Table des Matières
