Husky 10-26K Instructions D'installation page 10

11. After shimming of cross member is complete, measure "HUSKY 10-26K" at the indicated
areas shown below. Compare measurements "A" and "B", if measurements are within
1/4" of each other proceed to the next step. If not, then determine which of the shims that
were placed in the cross member can be moved to achieve this difference.
All Products limited to Vehicle Tow Rating; see Vehicle Owners Manual
March 15, 2012-REV 5 See www.huskytow.com for Warranty Information / Tech Support
Page 10 of 16