Safety Information; Product Description - Pontec PondoMax Eco 8500 C Notice D'emploi

Information about these operating instructions
You made a good choice with the purchase of this product PondoMax Eco 8500 C / 11500 C / 17500 C.
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new
owner.

Safety information

Correct electrical installation
 Electrical installations must meet the national regulations and may only be carried out by a qualified electrician.
 A person is regarded as a qualified electrician if, due to his/her vocational education, knowledge and experience, he
or she is capable of and authorised to judge and carry out the work commissioned to him/her. This also includes the
recognition of possible hazards and the adherence to the pertinent regional and national standards, rules and regula-
tions.
 For your own safety, please consult a qualified electrician.
 Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use (splash-proof).
 Protect the plug connection from moisture.
 Only connect the unit to a correctly fitted socket.
Safe operation
 The impeller unit in the pump contains a magnet with a strong magnetic field that may affect the operation of pace-
makers or implantable cardioverter defibrillators (ICDs). Always keep magnets at least 0.2 m away from implanted
devices.
 Never carry or pull the unit by the electrical cable.
 Route cables such that they are protected from damage and do not present a tripping hazard.
 Never carry out technical changes to the unit.
 Only carry out work on the unit that is described in this manual. If problems cannot be overcome, please contact an
authorised customer service point or, if in doubt, the manufacturer.
 Only use original spare parts and accessories for the unit.

Product Description

Overview
 A
Description
1 Filter housing with filter pump
2 Controller for regulating the filter pump power
3 Stepped hose adapter with union nut
Intended use
Only use the product described in this manual as follows:
 For pumping normal pond water for filter systems, waterfall systems and water course systems.
 Operate in accordance with instructions.
The following restrictions apply to the unit:
 Do not use in swimming ponds.
 Never use the unit with fluids other than water.
 Never run the unit without water.
 Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
 Do not use for commercial or industrial purposes.
 Do not connect to the domestic water supply.
- EN -
13