Connect Ductwork - Broan Elite RM65000 Serie Mode D'emploi

CONNECT DUCTWORK

1. Use (2) screws (4.8x38mm) and drywall
anchors (supplied) to secure flue mounting
bracket to the ceiling or wall as shown.
2. Use 6" round metal duct to connect the
discharge collar on the hood to the
ductwork above.
3. Use duct tape to make all joints secure
and air tight.
4. Carefully place the lower decorative flue into
the recessed area of the range hood top.
5. Push the lower flue downwards making it
fit properly.
6. Extend the upper flue to the ceiling and
secure with two mounting screws
(3.9x9.5mm).
FASTEN FLUE TO
BRACKET WITH MOUNTING
SCREWS
(3.9x9.5mm)
- 7 -
FIXING TO THE WALL
MOUNTING
SCREWS
FLUE MOUNTING
(4,8x38mm)
FIXING TO THE CEILING
MOUNTING
SCREWS
FLUE MOUNTING
(4,8x38mm)
BRACKET
BRACKET
DECORATIVE
FLUE
DUCT TAPE
6" ROUND
METAL DUCT