Electrolux TK 5357 F Notice D'utilisation page 59

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.
Push down unlock button on large mesh filter.
Large mesh filter jumps up.
5.
Take out fine strainer.
6. Remove fluff from fine strainer. It is best to use
a damp hand for this purpose.
Clean the entire filter area
The strainer area does not have to be cleaned
after every drying cycle, but should be
checked regularly and cleaned of fluff if nec-
essary.
7.
To do this, grip the top of the large mesh filter
and pull it forwards until it comes loose from
the two brackets.
8. Remove fluff from the entire filter area. It is best
to use a vacuum cleaner for this purpose.
9. Press both journals of the large mesh filter into
the brackets on the loading door until they
snap into place.
10. Re-insert fine strainer.
11.
Press against the large mesh filter until it locks
into the interlock.
If the fine strainer is not fitted, the large mesh
filter will not snap into place and the loading
door cannot be closed.
Cleaning the door seal
Wipe the door seal with a damp cloth immediately
after the drying cycle has finished.
Emptying the water reservoir
Empty the water reservoir after every drying cycle.
If the water reservoir is full, an active programme
is stopped and the Water reservoir (Behälter) diode
is on. To continue the programme, empty the wa-
ter reservoir.
electrolux 59

Publicité

Table des Matières
loading

Table des Matières