Step 5: Create An Activesync Connection - Leica Geosystems DX10 Mode D'emploi

2.5
ActiveSync
Connection, step-
by-step
Getting Started

Step 5: Create an ActiveSync Connection

Step Description
1. Plug USB Client end (mini B) of the USB communications cable
into your Field PC.
2. Plug the USB Host end (full size A) of the USB communications
cable into your desktop computer.
3. Establish an ActiveSync partnership by following the
instructions on the desktop computer screen.
You are now ready to use your Field PC. See the Technical Reference
Manual on the User Documentation CD for instructions on specific tasks.
DX10 17