Heating Up For The First Time - Sentiotec Concept R mini Instructions De Montage Et Mode D'emploi

Instructions for use for the user

5.2. Heating up for the first time

CAUTION!
Formation of smoke and odours when heating up for the first time
Working materials from the manufacturing process will be present on
the new heating elements. These evaporate when the sauna heater is
heated up for the first time. This produces smoke and an unpleasant
odour. Breathing in the fumes or smoke can be harmful to your health.
Perform the following steps when operating the sauna heater for the first time
and if the heating elements for the sauna heater have been changed. In this
way you will prevent damage to health due to the fumes and smoke produced
when heating up for the first time.
1. Select the highest possible temperature on the sauna control unit.
2. Heat up the sauna heater for half an hour.
Do NOT remain in the sauna cabin during this period.
3. Allow the sauna cabin to ventilate thoroughly after heating up for the first time.
4. If no smoke or odour is produced the next time the sauna heater is heated
up, you can start to use the sauna.
If smoke or odour is produced again, leave the sauna cabin immediately
and repeat the initial heating up process followed by ventilation.
WORLD OF WELLNESS
p. 18/24