Sentiotec Concept R mini Instructions De Montage Et Mode D'emploi page 30

Instructions for installation and use
● Only install one sauna heater in the cabin. The Concept R mini
sauna heater must not be used together with other sauna heat-
ers in a sauna cabin.
● The roof and walls of the sauna cabin are manufactured from
low-resin, untreated or thermally treated wood, e.g. Nordic spruce,
hemlock, pine or fir, or from laminated wooden materials. If lami-
nated wooden materials are used, make sure that the adhesive
used in them does not produce formaldehyde. If other materials
than wood are used in the sauna cabin, these materials must be
heat-resistant and corrosion-resistant and must not cause any
negative effects on the health of the sauna users.
● The height of the sauna cabin must be at least 1.9 m.
● Observe the specifications on volumes and on ventilation of the
sauna cabin in chapter 10. Technical data.
● When positioning the sauna heater, observe the minimum safety
distances (see chapter 4.2. Safety intervals).
● Observe all regulations applicable at the installation location.
● For your own safety, consult your supplier in the event of prob-
lems that are not explained in sufficient detail in the installation
instructions.
WORLD OF WELLNESS
p. 6/24