A&D Medical LIFESOURCE 1100 ULTRACONNECT Mode D'emploi page 21

MEASUREMENT
Visitor Mode Measurement
1. Press the Start button on the monitor.
2. Press the Start button again to switch between username
and select "0 Visitor".
3. The C.P.G. indicator will display the correct wrist position
briefly. Measurement starts automatically after 3 seconds.
4. When the measurement is complete, the
monitor will display results similar to the
icon on the right.
pulse rate will be displayed in rotation.)
Visitor Mode is only available through the monitor. Data is
not stored in visitor mode.
(Systolic, diastolic and
E-21