Emerson DESIGNER CF755GRT06 Mode D'emploi page 9

3. Ceiling Fan Assembly
3.11
Engage the Switch Housing Assembly Connector with
the Fan Motor Assembly Connector (Figure 11).
The Two Connectors are Keyed and Color-Coded and
must be mated correctly (color-to-color) before they can
be engaged.
Make sure the Connector Latch closes properly.
3.12
Remove the three Switch Housing Mounting Screws
(Figure 12) from the Switch Housing Plate.
Retain the Screws for future use in Step 3.13.
NOTE: If you are using an Emerson light fixture
with your fan: Remove the screw plug from the
bottom of the switch housing cover and install
the light in accordance with the light kit Owner's
Manual.
Make light kit electrical connections to blue and
white wires marked "For Light" in the switch
housing.
Follow light kit instructions for wiring and
installation. Then reinstall switch housing as
outlined above.
(Continued)
Figure 11
SWITCH HOUSING
PLATE
REMOVE
SWITCH HOUSING
MOUNTING SCREWS (3)
Figure 12
Please contact 1-800-654-3545 for further assistance
9
SWITCH HOUSING
CONNECTOR
FAN MOTOR ASSEMBLY
CONNECTOR
emersonfans.com
U.L. Model No.: CF755