Wolf GR484CG-LP Guide D'utilisation Et D'entretien page 10

SU R FA C E O P E RAT I O N
Infrared Charbroiler
The charbroiler has an infrared burner that transfers intense
heat to food, searing the outside to seal in juices. Cook food
directly on the charbroiler grate, do not use cookware.
For optimal performance of the charbroiler and provide even
cooking, install the blank-off plate provided with the range.
Assemble charbroiler:
To assemble, position charbroiler frame on the range.
1
Position blank-off plate centered directly on ceramic
2
tiles. Refer to the illustration below.
Install charbroiler grate. Refer to the illustration below.
3
CAUTION
Use care when assembling the charbroiler to avoid
contact with the igniter.
IGNITER
BLANK-OFF
PLATE
Blank-off plate
|
10 Wolf Customer Care 800.222.7820
CHARBROILER
GRATE
Charbroiler grate
C H AR B R OI LER O PER ATI ON
The stainless steel cover must be removed prior to
operation.
Turn on ventilation.
1
Push and turn control knob counterclockwise to HI.
2
Igniter will begin to click until burner is lit.
Allow to preheat for 10 minutes.
3
C H AR B R OI LER C AR E
• After cooking is complete, allow the charbroiler to remain
on for 10 minutes. High heat will help burn off excess
food particles.
• When cool, remove the grate and place in the sink.
Cover with wet dish towels and pour hot water over it
to help loosen residue. Clean with soap and a scouring
pad. Rinse and dry.
• To clean the frame, remove and place in the sink. Soak
in hot water and mild detergent. Wash thoroughly and
scrub with a scouring pad.
• To clean the blank-off plate, remove and use a soap-
filled scouring pad to remove residue. Clean with hot
water and mild detergent.