Accessories; Maintaining Your Steam Mop; After Use And Storage - shark S1000EU Instructions

Masquer les pouces Voir aussi pour S1000EU:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30

ACCESSORIES

Refer to the packaging
which shows the select
accessories that are
included with your model.
To purchase additional
accessories, visit
sharkaccessories.eu
DIRT GRIP
These easy-to-attach, reusable pads feature a super-
absorbent microfibre for locking in moisture and dirt
and scrubbing material for breaking up tough, stuck-
on stains.
PAD CARE INSTRUCTIONS
Machine-wash the Dirt Grip pads separately with warm
water using liquid detergent.
NEVER USE BLEACH, POWDERED DETERGENT or
FABRIC SOFTENERS as they may damage or leave
a coating on the Dirt Grip pads that will reduce their
cleaning performance and absorbency. Dirt Grip pads
should be line-dried or tumble-dried on a low setting,
as this will extend the life of the microfibre fabric.
Loose fibres can indicate wearing of the microfibre
fabric. DO NOT pull the loose fibres, as this can cause
the weave to come undone. Simply trim the loose fibres
with scissors.
For best cleaning results, we recommend replacing
your Dirt Grip pads every 3 to 4 months following
normal use. As with any fabric, dirt particles, grease,
friction and repeated washing can cause the fibres
to break down and you may notice an increase in the
effort needed to push or pull the mop.
40
0800 000 9063
WASHABLE PAD

MAINTAINING YOUR STEAM MOP

WARNING: To reduce
the risk of shock and
unintended operation,
unplug unit before
servicing.

AFTER USE AND STORAGE

Unplug the cord from the wall socket and wrap
1
the cord around the cord hooks. Lock the Steam
Mop in an upright standing position by raising
the handle until the pole is standing straight up,
perpendicular to the ground.
2 After cleaning, wait 2 to 3 minutes to let the Dirt
Grip
remove pad from mop head to avoid damage to
your floors. Remove the pad by stepping on the tab
and lifting off the mop head or by carefully pulling
the pad off the mop head.
3 With the unit locked in the upright standing
position, store it in a cupboard or the corner of
a room.
pad cool before touching it. When cool,
s h a r kc l e a n . e u
41

Publicité

Table des Matières
loading

Table des Matières