Clamping The Workpiece; Between Surfaces; Gripp Tips - Allmatic TeleCentric Instructions De Service

8 | Clamping
8.2

Clamping the Workpiece

8.2.1

Between Surfaces

Fig. 10: Clamping between surfaces
When clamping between surfaces, no material displacement takes place, i.e. the clamping
force is built up quickly.
8.2.2

GRIPP Tips

Fig. 11: GRIPP tips
The conical GRIPP tips (1) penetrate the workpiece and create a form fit.
The depth of indentation depends on:
– the clamping force
– the material strength
62 / 400
ALLMATIC
1
TeleCentric