Clamping; Various Clamping Types; Conventional Clamping Of Workpieces - Allmatic TeleCentric Instructions De Service

8 | Clamping

8 Clamping
8.1

Various Clamping Types

Further information on the clamping types: www.allmatic.de under "Products".
8.1.1

Conventional Clamping of Workpieces

Fig. 8: Clamping jaws for conventional clamping with a smooth surface
In the case of conventional clamping, parallel, pre-machined or level workpieces or materials
are clamped. Generally, conventional clamping is used for the second clamping process or for
workpieces with parallelism errors of up to 0.05 mm.
60 / 400
ALLMATIC
TeleCentric